高端压铸模具钢的开发应用是世创科技公司的主营业务之一,联合百年品牌大冶特钢(SZ:000708),依托公司30年材料热处理的强大实力,为客户提供高端优质母材,机加工,热处理,涂层,模具的设计与维护以及失效分析等压铸模具钢一站式解决方案。
电话:巫总 135 1279 2145
邮箱:lqh@strongmetal.com.cn
地址:广东省佛山市顺德区陈村石洲工业区30号
备案号:粤ICP备09051653号
Recommendations:
1. The main flow channel starts from the direct flow channel of the shunt cone, and the cross-sectional area decreases step by step. The effect of filling will be much better.
2. Add slag discharge and exhaust at the Yellow frame.
3. The exhaust of the original slag ladle shall be widened according to the principle of 10-15% of the inner gate area.
4. Whether it is the product or mould structure, sharp corners should be avoided as far as possible. Otherwise, the service life of the mould will be seriously endangered.
4. The mould is best cooled by cooling water holes. Otherwise, it is common for erosion and cracking to occur prematurely.
The development and application of die casting mould steel is one of the main businesses of STRONG TECHNOLOGY company. Combined with Centennial Daye Special Steel and relying on the company's strong strength of material heat treatment for 30 years, it provides customers with one-stop solutions for die casting mould steel such as high-end high-quality base metal, machining, heat treatment, coating, mould design and maintenance and failure analysis.